What details should be paid attention to during the installation of shock absorber to ensure that its shock absorption effect is maximized?
Publish Time: 2025-03-26
As an important mechanical component, the installation quality of shock absorber is directly related to its shock absorption effect and service life. In order to ensure that shock absorber can play the best shock absorption effect, we must pay attention to a series of details during the installation process.Before installing the shock absorber, it is necessary to ensure that all relevant installation surfaces are clean and free of oil, dust or other impurities. These impurities may affect the fit between the shock absorber and the installation surface, thereby affecting the shock absorption effect. Therefore, before installation, we need to use appropriate cleaning agents to clean the installation surface and ensure that it is dry.The installation position of the shock absorber must be accurate. Generally speaking, the shock absorber should be laid out symmetrically according to the core center line of the equipment to ensure that it is evenly stressed. If the installation position is inaccurate, the shock absorber may be deflected or twisted when it is stressed, thereby affecting its shock absorption performance. In addition, when the shock absorber has multiple mounting points, such as six mounting points, we need to pay special attention to the fact that four of them should be installed on the four corners of the inert block or steel frame, and the other two should be placed on the long side line, and their positions should be adjusted to keep the compression deformation of the shock absorber as consistent as possible.When installing the shock absorber, we must ensure that the connection between it and the mounting surface is firm. This usually requires the use of special connectors, such as bolts, nuts, etc. During the connection process, we need to tighten it according to the specified torque value to ensure the reliability of the connection. At the same time, we also need to pay attention to the material and specifications of the connector to ensure its compatibility with the shock absorber.In addition, for specific equipment such as vertical pump units, we also need to set up a steel frame and install an anchor device. In this process, we need to ensure that the installation position of the steel frame is accurate and the connection between it and the shock absorber is also firm. At the same time, we also need to pay attention to the stiffness and stability of the steel frame to ensure that it can support the weight of the equipment and transmit the shock absorption force.During the installation process, we also need to pay attention to checking the static compression deformation of the shock absorber. This deformation should be within the specified range to ensure that the shock absorber can work properly when subjected to force. If the static compression deformation is too large or too small, it may affect the shock absorption effect of the shock absorber.Finally, we also need to pay attention to the use environment of the shock absorber. The shock absorber should avoid contact with corrosive substances such as acids, alkalis and organic solutions to avoid damage to its surface or internal structure. At the same time, we also need to pay attention to the temperature application range of the shock absorber to ensure that it can work properly at the specified temperature.In short, the installation process of the shock absorber is a process that requires high attention and meticulous operation. Only when we pay attention to the above details and operate strictly in accordance with the regulations can we ensure that the shock absorber can play the best shock absorption effect after installation.
